CRANKCASE BREATHERS

Applications

• Gas & Steam Turbines
• Turbo Compressors
• Generators

• Gearboxes
• Rotating Machinery
• High Speed Coupling

• Diesel Engines
• Contact JB Systems about your specific application

• The oil/gas separator eliminates crankcase emissions by actually closing the crankcase on your diesel engines or turbines. The separator takes the combined blowby oil and gases from the crankcase and separates the expensive oil from the volatile fuel-rich gases. The lube oil is returned to the crankcase and the remaining combustible gases and water vapor are inducted into the engine's air intake system for venting back to the atmosphere.
• Minimum 99.97% D.O.P. on 0.3 micron particles for high performance to meet "no visible emissions" objective.
• Captures oil fog, mist or smoke from the air stream of rotating equipment lubrication systems where back pressure needs to be avoided.
• Wrapped filter media
• Element has a 8000/hr mean life span
• Seamless draw housing-no welds to rust or vibrate apart
• Positive engagement O-ring seal and butterfly gasket element seal
• OSHA Compliant
• Operating Temp min-29^oC (-20^oF ) max 104^oC (220^oF)
• Wide range of operation flows

• Fan assist or Venturi
• Internal drainage for intermittent operations
• Pleated filter media
• External weatherhood
• Support members per requirements
• Multiple connection size
  
  
  
  
  
  
  
  
  

• Efficiency measurements
• Flow measurements